2 Minute Read
| Overview
The Monitoring Profile is a profile that comes with the HyperStat, that is used to monitor parameters in a zone. This provides enhanced visibility of hyperstat equipment that is monitored by the Carrier solution.
| How it Works
With its 8 onboard sensors, and advanced capability of the thermostat, humidistat, and IAQ sensing station, HyperStat provides a wide range of parameters monitoring capability.
Once configured, the sensed parameter shows up in zone settings screens across portals, apps, and CCU.
A zone can be paired with just one module of the monitoring profile.
There is no concept of building limit breach, zone priority and influencing the system level equipment. It does not affect any central air handling HVAC equipment connected to the CCU.
You can configure the following inputs that can be sensed.
- Temperature
- Humidity
- Co2 - CO2 widget
- VOC - CO2 widget
- Onboard Sensors - Sound, PM2.5, and Light - Sensor’s widget
- Thermistor 1 - Thermistor widget
- Thermistor 2
- Analog-in-1 -Analog Widget
- Analog-in-2
| Configuration
You can see the configuration screen for the Monitoring profile has Thermistor 1 and 2, and Analog-in 1 and 2 that can be enabled or disabled.
| Configuration Parameters
|
Parameter |
Purpose |
Default Value |
Values in the drop-down list |
|
temperatureOffset |
To set the offset temperature |
0 (°F) |
Range from -10 to + 10 in .1 increments
|
|
TH1 |
To sense inputs
|
10K Type 2 probe.
|
Generic 1-100Kohms |
|
TH2 |
To sense inputs
|
10K Type 2 probe.
|
Generic 1-100Kohms |
|
Analog- in1 |
To define the inputs to sense |
Generic 0-10V |
|
|
Analog- in1 |
To define the inputs to sense |
Generic 0-10V |
|
You can see widgets configured in the heatmap pages below.
Comments
0 comments
Please sign in to leave a comment.