Andy Phillips
Activity overview
Latest activity by Andy Phillips-
Andy Phillips created an article, HyperStat Split Overview & Installation
| Overview HyperStat Split is the best-in-class thermostat that can measure parameters in the zone and controls equipment at zone and system levels (RTUs & FCUs) by connecting seamlessly over two w...
-
Andy Phillips created an article, HyperStat Split control of a Heat Pump with a using the CPU & Economizer Profile
Controlling a Heat Pump with the CPU & Economizer is now available in CCU versions 4.0.5 of higher The set up is easily done. The compressor stages are selected as shown below (do not select cooli...
-
Andy Phillips created an article, URLs to whitelist for accessing Carrier data behind a proxy firewall
browse | Carrier services Name URL Description Alerts API https://alerts.carrier.service.75f.io Alert management service Alert-Builder API https://alert-builder.carrier.service.75f.io Alert...
-
Andy Phillips created an article, URLs to whitelist for accessing Carrier data behind a proxy firewall
browse | Carrier services Name URL Description Alerts API https://alerts.carrier.service.75f.io Alert management service Alert-Builder API https://alert-builder.carrier.service.75f.io Alert...
-
Andy Phillips created an article, Verifying and Updating CCU Software Version Before Calling For Technical Support
Read entire document before proceeding. Before placing a service call for a ClimaVision issue please verify that the CCU firmware is up to date. This is easily done by: Check which version the C...
-
Andy Phillips created an article, Changing System Device Software
This feature is only available to persons with the following certification levels:Installer Level 2 or higher certificationThis outlines the process for updating "All" devices of a given type. To u...
-
Andy Phillips created an article, Updating System Device Software
When a Software update to a system device is required it is accomplished through the WebUI. There are two different ways to perform the updates. Level 2 certification is required.First there is the...
-
Andy Phillips created an article, Understanding Setpoint Adjust Limits and How To Change Them
Building Limit settings You start with setting the limits, dead band and setbacks in the CCU under the Settings/ Installer Operations section, below is what needs to be set and how the settings int...
-
Andy Phillips created an article, Verifying and Updating CCU Software Version Before Calling For Technical Support
Read entire document before proceeding. Before placing a service call for a ClimaVision issue please verify that the CCU firmware is up to date. This is easily done by: Check which version the C...
-
Andy Phillips created an article, HyperStat Split- CPU & Economizer Profile
| How it Works The ClimaVision HyperStat Split Conventional Package Unit & Economizer profile is a standalone profile, that provides heating, cooling, and Economizer equipment controls for conditi...