browse

| Overview

With its onboard temperature sensing capability, one wire protocol slot to accommodate additional temperature sensors, and the daisy chaining wire provided by the Carrier HelioNode can be installed with more than a few temperature sensors in the bus.  

Thus said the HelioNode comes with a UI capability. to define the temperature to be displayed and communicated to the master.

It can be set to display and communicate the average temperature of all the sensors in the bus, or it can be set to display and communicate just the onboard sensor sensed value.

| Enabling and Disabling Averaging

To enable or disable the temperature averaging for the HelioNode

From the Installer option screen

Group_977_2x.png

  • Navigate to the Average Onboard Sensors option.

Group_984_2x.png

  • Press the right button on the HelioNode to access the Option. 

Group_987_2x.png

  • Use the up or down arrow to set it to a ON/OFF.

Group_985_2x.png Group_986_2x.png

  • Press the Set button to confirm.

 

Previous
Next

Comments

0 comments

Please sign in to leave a comment.

Was this article helpful?

0 out of 0 found this helpful
Powered by Zendesk